Adjusting The Riding Sag - Husqvarna FC 450 Heritage 2023 Owner's Manual

10.11

Adjusting the riding sag

Info
Depending on the static sag and/or the riding sag, it
may be necessary to increase or decrease the spring
preload.
–
1
Tighten bolt
Guideline
Screw, shock
absorber adjusting
ring
Finishing work
–
Install the shock absorber.
–
Install the right side panel. (
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the right side panel. (
–
Remove main silencer. (
–
Raise the motorcycle with a lift stand. (
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Select and mount a suitable spring.
B00292-10
TUNING THE CHASSIS 10
.
M5 5 Nm (3.7 lbf ft)
( p. 72)
p. 60)
p. 59)
p. 79)
p. 55)
( p. 71)
p. 101)
p. 55)
45