Stud Partition, Laminated Panel, Or Unfixed Rear-Entry Pipework Installation - Mira 1591.001 Installation And User Manual

Stud Partition, Laminated Panel, or Unfixed Rear-entry
Pipework Installation
Wall Mounting Bracket
1. Screw the mounting bracket onto the offset connectors.
2. The mounting bracket must extend in the same direction as the offset
of the offset connector. The angle between the offset connector and
the mounting bracket must be less than 45 . Otherwise, the mounting
bracket will not fit under the concealing plate.
3. The mounting bracket boss should protrude to the rear, facing the wall.
Offset Connector
Wall
Offset Connector
Mounting Bracket
Boss
45˚
45˚
Spirit Level
12
P4842170
150mm
P4842180
1054961-W2-B