Panasonic PT-CMZ50 Operating Instructions Manual page 82

Setting the ID number of projectors
Set the ID number of the projectors to enable simultaneous control or individual control via a single remote
control.
The [PROJECTOR ID] setting is synchronized with the [PROJECTOR SETUP] menu → [PROJECTOR ID]. The
most recent setting is reflected in both items.
1) Press as to select [MULTI IMAGE PROJECTION].
2) Press the <ENTER> button.
f The [MULTI IMAGE PROJECTION] screen is displayed.
3) Press as to select [PROJECTOR ID].
4) Press qw to select a projector ID.
f To select one item among [ALL] and [1] ~ [64].
[ALL]
[1] ~ [64]
Note
f To specify an ID number for individual control, the ID number of a remote control must match the ID number of the projector.
f When the ID number is set to [ALL], the projector will operate regardless of the ID number specified during remote control or computer
control.
If multiple projectors are set up side by side with ID set to [ALL], you cannot control a projector separately by specifying a different ID
number.
f Refer to "Setting the ID number on the remote control" (x page 60) for how to set the ID number on the remote control.
Setting the screen format
Set the screen format.
The [SCREEN FORMAT] setting is synchronized with the [DISPLAY OPTION] menu → [SCREEN SETTING] →
[SCREEN FORMAT]. The most recent setting is reflected in both items.
1) Press as to select [MULTI IMAGE PROJECTION].
2) Press the <ENTER> button.
f The [MULTI IMAGE PROJECTION] screen is displayed.
3) Press as to select [SCREEN FORMAT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[16:10]
[16:9]
[4:3]
Setting [HDMI OUT]
Make settings when outputting the signals of <HDMI IN 1> / <HDMI IN 2> / <DIGITAL LINK/LAN> terminal from
the <HDMI OUT> terminal.
The [HDMI OUT] setting is synchronized with the [PROJECTOR SETUP] menu → [HDMI OUT]. The most recent
setting is reflected in both items.
1) Press as to select [MULTI IMAGE PROJECTION].
2) Press the <ENTER> button.
f The [MULTI IMAGE PROJECTION] screen is displayed.
3) Press as to select [HDMI OUT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
82 - ENGLISH
Chapter 4 Settings - [POSITION] menu
Select when controlling projectors without specifying an ID number.
Select when specifying an ID number to control individual projector.
Set the desired screen format.