Panasonic PT-CW230U Operating Instructions Manual
Projector operations
Hide thumbs
Also See for PT-CW230U:
- Operating instructions manual (25 pages) ,
- Service manual (88 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Thank you for purchasing this Panasonic Product.
Before operating this product, please read the instructions carefully, and save this manual
J
for future use.
For information on using the product via a network, refer to "Operating Instructions – Network
Operations".
Operating Instructions
DLP
Based Projector
™
Model No.
Projector Operations
Commercial Use
PT-CW230U
PT-CX200U
ENGLISH
MB2AC
Advertisement
Chapters
Table of Contents
Related Manuals for Panasonic PT-CW230U
Summary of Contents for Panasonic PT-CW230U
-
Page 1: Operating Instructions
PT-CW230U Model No. PT-CX200U Thank you for purchasing this Panasonic Product. Before operating this product, please read the instructions carefully, and save this manual for future use. For information on using the product via a network, refer to “Operating Instructions – Network Operations”. -
Page 2: Read This First
Read this first! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only. CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V, 10 A. - Page 3 FCC NOTICE (USA) Declaration of Conformity Model Number: PT-CW230U/PT-CX200U Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: One Panasonic Way, Secaucus, NJ 07094 Telephone number: (877)803-8492 E-mail: projectorsupport@us.panasonic.com This device complies with Part 15 of the FCC Rules.
- Page 4 Read this first! WARNING: POWER „ The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector in these conditions will result in fire or electric shock. If foreign objects or water get inside the projector, cut off the power supply.
- Page 5 If liquid enters inside of the projector, consult your dealer. Particular attention must be paid to children. Use the ceiling mount bracket specified by Panasonic. Defects in the ceiling mount bracket will result in falling accidents. Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
- Page 6 Read this first! WARNING: ACCESSORIES „ Do not use or handle the batteries improperly, and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire. Do not use unspecified batteries. Do not disassemble dry cell batteries. Do not heat the batteries or place them into water or fire.
- Page 7 Read this first! CAUTION: POWER „ When disconnecting the power cord, be sure to hold the power plug and power connector. If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks will result. When not using the projector for an extended period of time, disconnect the power plug from the wall outlet and remove the batteries from the remote control.
- Page 8 Read this first! Brazil Only Brasil Apenas Manuseio de baterias usadas „ BRASIL Após o uso, as pilhas e /ou baterias poderão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada. Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa destinada para o recolhimento.
-
Page 9: Auto Setup Function
Features of the Projector Quick steps For details, see the corresponding pages. Auto Setup Function 1. Set up your projector. This function enables Input search Æ page 21) and Auto PC adjustment by pressing the <AUTO SETUP> button. Direct Power Off Function 2. -
Page 10: Table Of Contents
Contents Be sure to read “Read this first!”. ( pages 2 to 8) Basic operations by using the remote Important Information control........... 33 Read this first! ........... 2 Using the AUTO SETUP function ......... 33 Switching the input signal ..........33 Contents ........... - Page 11 Contents Color ................46 Lamp runtime ............... 58 Tint ................46 Filter counter ..............59 Color temp..............46 Factory default .............. 59 Red ................47 Information ..........60 Green ................47 Input Source Information Display ........ 60 Blue ................47 Sharpness ..............
-
Page 12: Precautions For Use
Precautions for Use Cautions when transporting When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Doing so may damage the internal parts and result in malfunctions. Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet. Cautions when installing Do not set up the projector outdoors. -
Page 13: Security
Make your password as difficult to guess as possible. Change your password periodically. Panasonic or its affiliate company never inquires a password directly to a customer. Do not tell your password in case you receive such an inquiry. The connecting network must be secured by firewall or others. -
Page 14: Cautions On Use
Precautions for Use Cautions on use In order to get the picture quality Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air conditioner can cause a shimmering effect on screen. - Page 15 We do not recommend viewing 3D images if you need sleep or have been drinking alcohol. Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R. Germany ENGLISH -...
-
Page 16: Accessories
Precautions for Use Accessories Make sure the following accessories are provided with your projector. Numbers in the brackets ( ) show the number of accessories. CD-ROM (x1) Batteries (AAA/R03 type) Remote control unit (x1) Power cord (x1) (6103615875) (x2) (6451054586) (6103597751) (for remote control unit) AC power cord holder... -
Page 17: About Your Projector
About Your Projector Remote control (18) (10) < > Button Turn the projector on or off. ( page 28) Æ (10) (11) <KEYSTONE> Button Correct keystone distortion. ( page 34) Æ (12) <INFO.> Button Operate the information function. ( page 34) Æ... -
Page 18: Projector Body
About Your Projector Projector body (8) (9) (12) (10) (11) (13) WARNING: (1) Control Panel and Indicators ( page 19) Æ (2) Remote control signal receptor Keep your hands and other objects (3) Lamp cover (Lamp and Air Filter) ( page 65) Æ... -
Page 19: Control Panel
About Your Projector Control panel (5) <SELECT> button Execute the selected item. (6) < > button Turn the projector on/off. (7) <AUTO SETUP> button Execute the setting of Auto setup in the setting menu. ( page 33) Æ (8) <KEYSTONE> button (10) (11) Correct keystone distortion. -
Page 20: Using Remote Control
For details, please refer to the [Remote control] of the [Setting] menu. ( page 57) Æ This remote control is only for PT-CW230U and PT-CX200U. You cannot operate the other Panasonic projectors by using this remote control. MENU button IMAGE button... -
Page 21: Setting Up
Setting up Projection method You can use the projector with any of the following 6 projection methods. To set the desired method in the projector. J Mounting on the ceiling Mounting on the ceiling Vertical projecting and projecting forward and projecting from rear upwards (Using translucent screen) (Using translucent screen) -
Page 22: Screen Size And Throw Distance
Setting up Screen size and throw distance Place the projector referring to the diagram on the right and the figures of throwing distance. You can adjust the display size. Projection distance (cm) Height of the projection area (m) Width of the projection area (m) Diagonal length of the projection area (m) Height from bottom of projector to bottom of screen (cm) - Page 23 Setting up Projection distance for PT-CX200U (All measurements below are approximate and may differ slightly from the actual measurements.) Projection size For 4:3 aspect ratio For 16:9 aspect ratio Screen diagonal (SD) 1.27 m(50") 24.8 cm(0.81') 35.5 cm(1.17') 1.40 m(55") 25.1 cm(0.82') 25.2 cm(0.83') 27.7 cm(0.91')
-
Page 24: Adjusting Front Adjustable Feet
Setting up Adjusting front adjustable feet Lift the front of the projector and rotate the adjustable feet to a proper height and tilt. You can turn the front adjustable feet to extend them. You can turn them in the opposite direction to contract them. -
Page 25: Connections
Connections Before connecting to the projector Read carefully the instruction manual for the device to be connected. Turn off the power switch of the devices before connecting cables. If any connection cable is not supplied with the device, or if no optional cable is available for connection of the device, prepare a necessary system connection cable to suit the device. -
Page 26: Powering On/Off
ic Operation Powering ON/OFF Connecting the power cord Be sure to insert the attached power cord securely to its base to prevent it from coming off. Power cord holder A power cord holder is designed to prevent the AC power cord from coming off the projector. Please insert the power cord into the power cord holder correctly as Picture (1) shown: AC Power cord holder Clamp... -
Page 27: On(G)/Standby(R) Indicator
Powering ON/OFF ON(G)/STANDBY(R) indicator The <ON(G)/STANDBY(R)> indicator informs you the status of the power. Confirm the status of the <ON(G)/ STANDBY(R)> indicator before operating the projector. ON(G)/STANDBY(R) indicator Indicator status Status No illumination or flashing The power cord is unplugged. The power cord is plugged. -
Page 28: Turning On The Projector
Powering ON/OFF Turning On the Projector Complete peripheral connections (with a Preparation display computer, VCR, etc.) before turning on the projector. Connect the projector’s AC power cord into an AC outlet. The <ON(G)/STANDBY(R)> indicator lights red. Press the < > button on the control panel or the remote control. -
Page 29: Enter A Pin Code
Powering ON/OFF Enter a PIN code Press ▲▼ to enter a number. Press ► to fix the PIN Code Input Dialog Box number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the ◄... -
Page 30: Turning Off The Projector
Powering ON/OFF Turning Off the Projector Press the < > button on the control panel or the remote control, and Power off? appears on the screen. Power off? disappears after 4 seconds. Press the < > button on the control panel or the remote control again to turn off the projector. -
Page 31: Projecting
Projecting Check the connections of the peripheral devices and connection of the power cord ( Æ page 26) and switch on the power ( Æ page 28) to start the projector. Select the image and adjust the state of the image. Selecting the image Select an input signal. -
Page 32: For Viewing 3D Contents
Projecting For Viewing 3D Contents To view 3D images, you need to prepare at least the 3D active shutter glasses, 3D content and 3D reproducing equipment. For example, as for computer, when transmitting 3D signals from a computer to the projector, you also need to install the graphic card which has the capability to sequentially output the 3D frames at 120Hz and software in the computer. -
Page 33: English
Basic operations by using the remote control Switch to Computer 1(RGB)/ COMPUTER 1 Computer 1(Scart) input. COMPUTER 2 Switch to Computer 2(RGB)input. HDMI Switch to HDMI input. VIDEO Switch to Video input. S-VIDEO Switch to S-video input. Switch to Computer 1 COMPONENT (Component) input. -
Page 34: Using The Keystone Button
Basic operations by using the remote control Using the KEYSTONE button Using the INFO. button This function allows you to correct keystone distortion. This function allows you to display the information menu. button button Press the <KEYSTONE> button on the control panel Press <INFO.>... -
Page 35: Using The Av Mute Function
Basic operations by using the remote control Using the AV MUTE function Using the D.ZOOM buttons This function allows you to enter to the Digital zoom +/– mode. button Press the < AV MUTE> button on the remote control buttons to black out the image. -
Page 36: Using The 3D Button
Basic operations by using the remote control Using the 3D button This function allows you to operate the 3D function. button Press <3D> button on the remote control. Note For details, see “3D” of "Setting" under Main menu. Æ page 54) Using the MUTE button Press this button on the remote control to select [On] to temporarily turn off the sound. -
Page 37: Menu Navigation
Menu Navigation Press ► or the <SELECT> button. Navigating through the menu The submenu appears so that you can select the sub-menu item. Operating procedure Press ▲▼ to select the desired sub- Press the <MENU> button. menu item. The Main Menu screen appears. Press the <SELECT>... -
Page 38: Main Menu
Menu Navigation Main menu Sub menu The main menu consists of the following 9 menu The sub-menu screen of the selected main menu items. appears, and you can set and adjust the various items When a main menu item is selected, the screen in the submenu. - Page 39 Menu Navigation Image adjust [ Setting [ Sub-menu item Factory default Page Sub-menu item Default Page Contrast Language English Brightness Menu position Center Color* Auto setup Tint* 3D setting Color temp. Zoom Store 1 Background Blue Green Display Blue Logo Sharpness HDMI setup Gamma...
-
Page 40: Input Menu
Input menu Computer 2: RGB Select [Input] from the Main Menu (see “Navigating through the menu” on page 37), Press ▲▼ to select [Computer 2 (RGB)] then select the item from the sub-menu. and then press the <SELECT> button. Control Panel Remote Control Computer System Selection This projector automatically tunes to various types... -
Page 41: Hdmi
Input menu HDMI Press ▲▼to select [HDMI] and then press the <SELECT> button. Video Press ▲▼ to select [Video] and then press the <SELECT> button. S-video Press ▲▼ to select [S-video] and then press the <SELECT> button. Video System Selection The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. -
Page 42: Auto Pc Adjust
AUTO PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 37), then select the item from the sub-menu. Control Panel Remote Control AUTO PC adj. [Auto PC adjustment] function is provided to automatically adjust [Fine sync], [Total dots], [Horizontal] and [Vertical] positions to conform to your computer. -
Page 43: Manual Pc Adjust
Manual PC adjust Horizontal Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 37), then select the item from the sub-menu. Press ▲▼ to select [Horizontal]. Press the <SELECT> button to display Control Panel Remote Control the adjustment dialog box. -
Page 44: Current Mode
Manual PC adjust Current mode Press ▲▼ to select [Current mode]. Press ► or the <SELECT> button to enter the next submenu to show H-sync freq. and V-sync freq. of the connected computer. Clamp Press ▲▼ to select [Clamp]. Press the <SELECT> button to display the adjustment dialog box. -
Page 45: Image Select
Image select Image 1-4 Select [Image select] from the Main Menu (see “Navigating through the menu” on page 37), For viewing with the user preset image mode in the then select the item from the sub-menu. Image adjust Menu. Press ▲▼ to select [Image 1-4] and then press the <SELECT>... -
Page 46: Image Adjust
Image adjust Color Select [Image adjust] from the Main Menu (see “Navigating through the menu” on page 37), then select the item from the sub-menu. Press ▲▼ to select [Color]. Press the <SELECT> button to display Remote Control Control Panel the adjustment dialog box. -
Page 47: Red
Image adjust Sharpness Press ▲▼ to select [Red]. Press ▲▼ to select [Sharpness]. Press the <SELECT> button to display Press the <SELECT> button to display the adjustment dialog box. the adjustment dialog box. Press ◄► to adjust the setting value. Press ◄►... -
Page 48: Progressive
Image adjust Progressive Press ▲▼ to select [Progressive]. Press the <SELECT> button to display the dialog box. Press ◄► to select the desired item. An interlaced video signal can be displayed in progressive mode. Select one of the following options. Disabled For an active picture For a still picture... -
Page 49: Screen
Screen True Select [Screen] from the Main Menu (see “Navigating through the menu” on page 37), Provide the image in its original size. When the then select the item from the sub-menu. original image size is larger or smaller than the panel size (1 280 x 800), the projector enters to the Remote Control... -
Page 50: Custom Adj
Screen To exit the Digital zoom +/– mode, press any button Custom adj. except the <D.ZOOM +/->, <SELECT> and ▲▼◄► buttons. Adjust the screen scale and position manually with this function. To return to the previous screen size, select a screen Press ▲▼... -
Page 51: Ceiling
Screen Ceiling Colorboard This function is used to project the image from a For the image projected on a colorboard. ceiling-mounted projector. Press ▲▼ to select [Colorboard]. Press ▲▼ to select [Ceiling] and then Press ► or the <SELECT> button to press the <SELECT>... -
Page 52: Sound
Sound Select [Sound] from the Main Menu (see “Navigating through the menu” on page 37), then select the item from the sub-menu. Remote Control Control Panel Volume Press ▲▼ to select [Volume] and then press the <SELECT> button. Press ◄► to adjust the volume. Press <SELECT>... -
Page 53: Setting
Setting Menu position Select [Setting] from the Main Menu (see “Navigating through the menu” on page 37), This function is used to change the position of the On- then select the item from the sub-menu. Screen Menu. Press ▲▼ to select [Menu position]. Control Panel Remote Control Press the <SELECT>... -
Page 54: Setting
Setting 3D setting Background This function is used to set the 3D display function. Select the background screen for when no input signal Press ▲▼ to select these functions as is detected. follows: Press ▲▼ to select [Background]. Press the <SELECT> button. Press ▲▼... -
Page 55: Logo
Setting Logo HDMI setup This function allows you to customize the screen logo This function is only used for HDMI input source. with [Logo select], [Logo PIN code lock] and [Logo Press ▲▼ to select [HDMI setup]. PIN code change] functions. Press ►... -
Page 56: Standby Mode
Setting Timer Standby mode Press ▲▼ to select [Timer] and then This function can set the electric power when the press the <SELECT> button. projector is standing by. Press ▲▼ to set the Timer(1~30min). Press ▲▼ to select [Standby mode] and then press the <SELECT>... -
Page 57: Lamp Power
Setting Lamp power Security This function allows you to change brightness of the This function allows you to use the Key lock and PIN screen. code lock function to set the security for the projector operation. Press ▲▼ to select [Lamp power] and Press ▲▼... -
Page 58: Fan
Setting PIN code change *1 : Set this function to [Off] when using the projector in non-high altitude environment. The PIN code can be changed to your desired four- *2 : Select this mode when using the projector in high digit number. -
Page 59: Filter Counter
Setting Filter counter This function is used to set a frequency for the filter replacement. Press ▲▼ to select [Filter counter]. Press ►or the <SELECT> button to access the submenu items. Filter counter Show the total accumulated time of the filter use timer setting. -
Page 60: Information
Information Lamp runtime Select [Information] from the Main Menu (see “Navigating through the menu” on page 37), The cumulative lamp operating time is displayed. then select the item from the sub-menu. Power management Remote Control Control Panel [Off] , [Ready] or [Shut down], and [Timer] are displayed. -
Page 61: Lamp And Warning Indicators
LAMP and WARNING Indicators LAMP and WARNING Indicators Managing the indicated problems If a problem should occur inside the projector, the <ON(G)/STANDBY(R)> , <LAMP> and/or <WARNING> indicators will inform you. Manage the indicated problems as follow. CAUTION Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. Æ... -
Page 62: Replacement
Replacement Before replacing the unit When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect Æ the power plug from the wall outlet. ( pages 26, 30) Æ Be sure to observe the procedure “Turning off the projector” ( page 30) when performing power supply operation. -
Page 63: Resetting The Filter Counter
Replacement Resetting the Filter Counter Be sure to reset the Filter counter after replacing the air filter unit. ( page 59" Filter counter reset") Æ Attention Turn off the power before you replace the air filter unit. When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is safe, even in the event of the air filter unit dropping. -
Page 64: Lamp Unit
Replacement Lamp unit The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the Information menu on page 60. It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer. Consult your dealer to purchase a replacement lamp unit (ET-LAC100). -
Page 65: Replacing The Lamp Unit
Replacement Replacing the Lamp unit CAUTION: When the projector is mounted on a ceiling, do not work with your face close to the projector. Attach the lamp unit and the lamp cover securely. When you experience difficulty in installing the lamp, remove it and try again. If you use force to install the lamp, the connector may be damaged. -
Page 66: Troubleshooting
Troubleshooting Please check following points. For details, see the corresponding pages. Reference Problem Cause page The power cord may not be connected. — No electric supply is at the wall outlet. — Power does not turn The circuit breakers have tripped. —... - Page 67 Troubleshooting Reference Problem Cause page Is the HDMI cable securely connected? Picture from a HDMI device does not Turn off the power of the projector and the connected devices. Then turn — appear or picture is the power of the projector and the connected devices back on. not stable.
-
Page 68: Technical Information
Technical Information Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector. Connection Connecting terminals on projector Computer... -
Page 69: Functional Execution Command
Technical Information Functional Execution Command Format The projector control command is defined as one command line that starts with "C" and ends with carriage return. More than 100ms Command “C” “0” “7” CR PC � Projector Next Command Projector � PC Response (A few ms ~ 5s) Command... -
Page 70: Status Read Command
Technical Information Status Read Command Format The projector control command is defined as one command line that starts with "CR" and ends with carriage return. Command PC � Projector “C” “R” “0” CR Projector � PC Processing (A few ms ~ 5s) Command Function Projector... -
Page 71: Other Terminals
Technical Information Other terminals Pin assignments and signal names of <S-VIDEO IN> terminal Pin No. Signal names Outside view GND (luminance signal) GND (color signal) Luminance signal Color signal Pin assignments and signal names of <COMPUTER 1 IN/COMPONENT IN> terminal Pin No. - Page 72 Technical Information Pin assignments and signal names of <HDMI> terminal Pin No. Signal names Pin No. Signal names Outside view T.M.D.S data 2+ T.M.D.S clock shield T.M.D.S clock - T.M.D.S data 2 shield Even-numbered pins T.M.D.S data 2 - T.M.D.S data 1+ —...
-
Page 73: List Of Compatible Signals
Technical Information List of compatible signals The following table specifies the types of signals compatible with the projectors. Format : V = VIDEO, S = S-VIDEO, C = COMPUTER, Y = YP , H = HDMI Scanning Picture Display Dot clock frequency quality * Mode... - Page 74 Technical Information Scanning Picture Display Dot clock frequency quality * Mode resolution * frequency PnP* Format Display (dots) (MHz) H (kHz) V(Hz) CW230U CX200U 48.360 60.000 65.000 ○ ○ 68.677 84.977 94.504 60.023 75.030 78.750 ○ 56.476 70.070 75.000 ○ 60.31 74.92 79.252...
- Page 75 Technical Information Scanning Picture Display Dot clock frequency quality * Mode resolution * frequency PnP* Format Display (dots) (MHz) H (kHz) (Hz) CW230U CX200U 75.00 60.00 162.00 ○ 81.25 65.00 175.50 UXGA 1 600 x 1 200 87.5 70.00 189.00 93.75 75.00 202.50...
- Page 76 Technical Information Scanning Picture Display Dot clock frequency quality * Mode resolution * frequency PnP* Format Display (dots) (MHz) H (kHz) (Hz) CW230U CX200U D-VGA 640 x 480 31.469 59.940 25.175 ○ ○ 37.879 60.320 40.000 ○ ○ D-SVGA 800 x 600 76.302 119.972 73.250...
-
Page 77: Specifications
Specifications Model No. PT-CW230U PT-CX200U Power supply AC100 V - 240 V 50 Hz/60 Hz 100 V - 240 V 4.5 A-2.2 A, 350 W When [Standby mode] of [Setting] is set to [ECO]: 0.45W Power consumption When [Standby mode] of [Setting] is set to [Network]: 11.0W Size 0.65"(aspect ratio 16 : 10) 0.55"(aspect ratio 4 : 3) - Page 78 Specifications Model No. PT-CW230U PT-CX200U 1 (D-sub 15 pin female) [RGB signal] 0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 [p-p] 75 Ω COMPUTER 1 IN/ HD/SYNC TTL high impedance, automatic positive/negative polarity compatible COMPONENT IN VD TTL high impedance, automatic positive/negative polarity compatible signal] Y: 1.0 V [p-p] including synchronization signal, P : 0.7 V [p-p] 75 Ω...
-
Page 79: Dimensions
Specifications Dimensions <Unit : mm(inch)> 125.8 (4.95) 114.5 (4.51) 104.2 (4.10) 107.9 (4.25) 10.0 (0.39) 134.6 (5.30) 77.5 (3.05) 170.0 (6.69) 178.0 (7.01) 321.0 (12.64) Actual dimension may differ by product. Ceiling mount bracket safeguards Installation work of the ceiling mount bracket should only be carried by a qualified technician. Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions. -
Page 80: Index
Index Number Input search ........53 Switching the input signal ....33 Installing and Removing batteries ..20 3D setting ........54 Terminal ..........55 Keystone........34, 50 Tint ..........46 About Your Projector.......17 Troubleshooting ......66 Accessories ........16 Adjusting front adjustable feet ..24 True ..........49 LAMP indicator .......61 Turning Off the Projector ....30 AUTO PC adjust ......42 Lamp runtime........58... - Page 81 If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Panasonic Corporation Web Site : http://panasonic.net/avc/projector/ Panasonic Systems Communications Company of North America One Panasonic Way 2F-13, Secaucus, NJ 07094 TEL: (877) 803 - 8492 Panasonic Canada Inc.