Table of Contents
Advertisement
4)
Press as to select [OK] and press the <ENTER> button.
Note
f If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
[PJLink]
Set the PJLink function to control and monitor the projector using the PJLink protocol.
Setting the password of the administrator account (x page 118) is required for using the PJLink function of the
projector.
Note
f If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
[PJLink PASSWORD]
Set the password for security authentication which is required when connecting to the projector.
1)
Press as to select [PJLink].
2)
Press the <ENTER> button.
f The [PJLink] screen is displayed.
3)
Press as to select [PJLink PASSWORD], and press the <ENTER> button.
f The [PJLink PASSWORD] screen is displayed.
4)
Press as to select [PASSWORD] under [CURRENT], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
5)
Press asqw to select a character, and press the <ENTER> button.
f Enter the current password.
f The factory default setting of password is blank.
6)
After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [PJLink PASSWORD] screen is displayed.
7)
Press as to select [PASSWORD] under [NEW], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
8)
Press asqw to select a character, and press the <ENTER> button.
f Enter a new password.
f Up to 32 alphanumeric characters can be entered.
9)
After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [PJLink PASSWORD] screen is displayed.
10) Press as to select [PASSWORD CONFIRM], and press the <ENTER> button.
f The [PASSWORD CONFIRM] screen is displayed.
11) Enter the password entered in Step 8).
12) After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [PJLink PASSWORD] screen is displayed.
13) Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
14) Press qw to select [OK], and press the <ENTER> button.
Note
f The PJLink password can also be changed on the [Set up password] page (x page 149) of the web control screen.
122 - ENGLISH
Chapter 4 Settings - [NETWORK] menu
Advertisement
Chapters
Table of Contents
