KTM 690 Duke 2017 Owner's Manual page 161

17 TUNING THE ENGINE
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the gear-
ing.
–
Mount and tighten screw with the washers.
H01085-10
Guideline
Screw, shift lever
(Duke R)
–
Loosen nut
–
Loosen nut
–
Turn threaded rod
H01082-10
–
Tighten nut
Guideline
Shift rods, nut
A of the shift lever and shift shaft.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
M6
1
, holding threaded rod
Info
1
Nut has a left-handed thread.
3
, holding threaded rod
2
to adjust the shift lever.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
3
while holding threaded rod
14 Nm Loctite
(10.3 lbf ft)
2
.
2
.
2
.
M6 6 Nm (4.4 lbf ft)
159
® 243™