Closing The Filler Cap - KTM 690 Duke 2017 Owner's Manual

6 CONTROLS
6.7

Closing the filler cap

–
Lift cover 1
Note
Danger of damage Ignition key breakage.
–
To take pressure off of the ignition key, push down on the filler cap. Damaged igni-
tion keys must be replaced.
–
Turn the ignition key 90° clockwise.
–
Open the filler cap.
V00556-10
–
Fold down the filler cap.
–
Turn the ignition key 90° clockwise.
–
Push down the filler cap and turn the ignition key counterclockwise until the lock
closes.
Warning
Fire hazard Fuel is highly flammable, poisonous and harmful to your health.
–
V00557-01
–
Remove the ignition key and close the cover.
of the filler cap and insert the ignition key in the lock.
After closing the filler cap, ensure that it is locked properly. Change cloth-
ing that has been contaminated with fuel. Immediately clean contaminated
areas on the skin with soap and water.
31