14
WHEELS, TIRES
14.4
Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear wheel.
–
Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
Main work
–
Check the rear hub rubber dampers.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Remove spacer.
–
Clean and grease shaft seal ring
Long-life grease (
–
Insert the spacer.
–
Clean and grease the thread of the wheel spindle and nut.
H00937-11
Long-life grease (
–
Clean the mating surfaces of the brake caliper support and swingarm.
(
p. 123)
1
and contact surface
p. 197)
p. 197)
121
A
of the spacer.