KTM 690 Duke 2017 Owner's Manual page 166

18 SERVICE WORK ON THE ENGINE
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Thoroughly clean the parts and sealing surface.
K00371-10
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surface.
K00417-10
–
Insert the new oil filter.
–
Oil the O-rings of the oil filter covers. Position oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
K00372-10
3 . Remove oil filter cover
5
out of the oil filter housing.
6
. Remove oil filter cover
8
out of the oil filter housing.
4 with the O-ring.
7
with the O-ring.
4 7
and
M5 6 Nm (4.4 lbf ft)
164
.