KTM 690 Duke 2017 Owner's Manual page 165

18 SERVICE WORK ON THE ENGINE
Info
Drain the engine oil while the engine is at operating temperature.
Main work
–
Rest the motorcycle on its side stand on a horizontal surface.
–
Place a suitable container under the engine.
–
Remove oil filler plug
H01066-10
–
Remove oil drain plug
–
Completely drain the engine oil.
–
Thoroughly clean the oil drain plug with magnet.
–
Mount and tighten the oil drain plug with the magnet and a new seal ring.
Guideline
Oil drain plug with magnet
K00370-10
1 with the O-ring from the clutch cover.
2
with the magnet and seal ring.
M12x1.5
163
20 Nm
(14.8 lbf ft)