KTM 690 Duke 2017 Owner's Manual page 158

16 COOLING SYSTEM
–
Remove radiator cap
V00077-10
–
Remove bleeder screw
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the vent hole, and then mount and
tighten bleeder screw
Coolant
–
Completely fill the radiator with coolant. Mount radiator cap
–
Rest the vehicle on the side stand.
–
Check the coolant level in the compensating tank. (
K00444-10
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
–
–
–
Start the engine and run it until the 5th bar of the temperature indicator lights up.
–
Stop the engine and allow it to cool down.
1 .
2
.
2
immediately.
1.20 l (1.27 qt.)
Always make sure there is sufficient ventilation when running the engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
Coolant ( p. 194)
1
.
p. 152)
156