12
SERVICE WORK ON THE CHASSIS
12.5
Removing the passenger seat
12.6
Mounting the passenger seat
–
Insert the ignition key in seat lock
–
Raise the rear of the passenger seat, push it towards the rear, and remove it upward.
–
Remove the ignition key from the seat lock.
V00043-10
–
Hook catches
and simultaneously push forward.
–
Press down the passenger seat until it clicks into place.
Warning
Danger of accidents The passenger seat can come loose from the anchoring if it
is not mounted correctly.
–
K00421-10
–
Finally, check that the passenger seat is correctly mounted.
1
1
of the passenger seat onto the storage compartment, lower the rear,
After mounting the passenger seat, check that it is locked correctly by
pulling up.
and turn it clockwise.
86