KTM 690 Duke 2017 Owner's Manual page 167

18 SERVICE WORK ON THE ENGINE
–
Remove screw plug
–
Completely drain the remaining engine oil.
–
Thoroughly clean the parts and sealing surface.
V00589-10
–
Remove screw plug
–
Completely drain the remaining engine oil.
–
Thoroughly clean the parts and sealing surface.
H00382-10
–
Position oil screen
–
Position the pin wrench through the drilled hole of the screw plug in the opposite sec-
tion of the engine case.
–
Push the oil screen all the way into the engine case.
V00590-10
8 with oil screen 9 and the O-rings.
bk bl
with oil screen and the O-rings.
9
with the O-rings on a pin wrench.
165