14
WHEELS, TIRES
(Duke R)
–
Position wheel speed sensor
Guideline
Remaining screws, chassis
–
Position the brake caliper.
The brake linings are correctly positioned.
–
Position spacers
–
Operate the hand brake lever repeatedly until the brake linings are in contact with
K00432-10
the brake disc and there is a pressure point. Fix the hand brake lever in the acti-
vated position.
The brake caliper straightens.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Remove the locking piece of the hand brake lever.
–
Take the motorcycle from the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear. (
4
in the drill hole. Mount and tighten screw
6
. Mount screws
7
but do not tighten yet.
7
.
M10x1.25
M6
10 Nm (7.4 lbf ft)
45 Nm
Loctite
®
(33.2 lbf ft)
p. 85)
p. 83)
118
5
.
243™