Superior Fireplaces BGE18NE Installation And Operation Instruction Manual page 20

10. Place the left top log onto the rear log and
the left middle log. Make sure to place the
projection on the bottom of the left top log
into the recessed areas on the rear and left
middle logs (see Figure 37).
Left
Middle
Log
Figure 37 - Installing Left Top Log
11. Rest the middle crossover log onto the right
middle log and the left front log (see Figure
38). Make sure to match the projection on
the bottom of the crossover log with the
recess area in the right middle log and the
left front log.
Middle
Crossover
Log
Figure 38 - Installing Middle Crossover
Log
12. Place the top rear log onto the rear log as
shown. The rear log has a projection that
will fi t into the recess area on the bottom of
the top rear log (see Figure 39).
20
INSTALLATION
Continued
Top Rear
Log
Left Top Log
Rear Log
Figure 39 - Installing Top Rear Log
EMBER PLACEMENT
WARNING: Do not use any other
ember material not supplied with
this unit.
WARNING: Do not operate unit
without ember material correctly in
place as shown in Figures 41 & 42,
Page 21. Do NOT place ember mate-
rial anywhere else on the unit. Use
only ember material supplied with
unit. Excessive or incorrectly placed
ember material may produce carbon
monoxide or soot. If replacement
embers are needed, the replacement
embers must be purchased from
IHP. See Page 41 for part numbers
WARNING: All previously ap-
plied loose material must be re-
moved prior to reapplication.
If replacement embers are needed,
the replacement embers must be
purchased from IHP. See Page 41
for part numbers.
1. Ember Chunk Placement. The BGE2436
burner systems include three ember chunks
that are designed to fi t over shoulder screws
on the ember pan burner. The bottom of
each ember chunk has a hole for securing
the ember chunk in place when it is placed
over a shoulder screw. Place the ember
SuperiorFireplaces.us.com
Rear Log
.
900703-00C