Two 13-Mm Long Vertical Streaks - Ricoh Pro C651EX Troubleshooting Manual

Hide thumbs Also See for Pro C651EX:
Table of Contents

Advertisement

3.1.7 Two 13-mm Long Vertical Streaks

Two 13-mm long vertical streaks appear within 110 mm (4.4 inches) from the
leading edge.
110 mm
(4.4 in.)
Cause:
The invert exit drive rollers or invert exit idle rollers in the machine's left drawer are
soiled.
This may occur if:
• Sheets are delivered face down after one-sided printing
• Images are printed on a white or halftone yellow background
Solution:
Clean the invert drive rollers and invert exit idle rollers in the machine's left drawer.
1. Make sure that the system is turned off and the machine power cord is
disconnected from the power source.
2. Open the left and right front covers.
3. Lower the lever C1, and then pull the left drawer out completely until it stops.
1
2
13 mm
(0.5 in.)
67 mm
(2.6 in.)
13 mm
(0.5 in.)
CNT005
CEZ124
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro c751exPro c751

Table of Contents