Table of Contents
Advertisement
6. Transport/Installation
6-1. Transport Procedures
WARNING : INJURY
Always be sure to use "Lifting Hook" when lifting up the generator. Using other parts
when lifting up the generator could cause the result of falling.
No persons should ever be under a lifted generator.
CAUTION : INJURY
Always be sure to use "Lifting Hook" when lifting up the generator, and raise it slowly
at a completely vertical angle.
Personnel performing lifting work must wear protective gear such as helmets, safety
shoes and gloves.
Do not move the generator during operation.
(1) Lifting Procedures
Always be sure to use "Lifting Hook" when lifting up the
generator, and raise it slowly at a completely vertical angle.
(2) Transport
When transporting this generator, tie rope to the left and right
"Tie Holes", and securely fix the generator. Using ropes to tie
down machine, should be using chains for large or straps for
small machines.
< Note >
Handle this generator with great care when raising, lowering and transporting. Rough
handling of generator can result in damage or malfunction.
6-2. Installation Procedures
WARNING : EXHAUST GAS POISONING
Do not operate the generator in poorly ventilated areas such as indoors or tunnels,
as the exhaust gas of the engine contains substances that are harmful to human
health.
Do not direct exhaust fumes at bystanders or buildings.
CAUTION : FIRE
Do not carry flammable items (such as fuel, gas and paint) or items that are highly
combustible near the generator as the muffler, exhaust gas and other parts become
extremely hot.
Operate this generator 3 ft. (1 m) or more from walls or other hindrances, and on a
level surface.
Do not connect the generator output to indoor wiring.
If installing this generator, set up barriers or fencing completely around the boundary line of
the construction area and take measures to prevent persons not involved in the
construction from entering the area.
Lifting
Hook
32
Tie Hole
Tie Hole
Advertisement
Table of Contents
