6 Remote Communications
6.2 Connecting ERX350 with Modems
6.2 Connecting ERX350 with Modems
Follow the steps below to connect a ERX350 device with PowerSpring using a Messenger Modem:
Configure ERX350 using MasterLink
l
Configure ERX350 in PowerSpring
l
6.2.1 Configure ERX350 using MasterLink
Launch MasterLink, and go to DISPLAY tab in tool bar and click on Item by Function option. Inside the
Display/Change Items By Function window double click the Site Information option. Configure the
following parameters:
1. SITE INFORMATION: The site ID should be identical to (six digit, hexadecimal) the one configured
in PowerSpring during the ERX350 product addition.
PowerSpring can use Site ID 1 or Site ID 2, that is setup in System Configuration -> Data Collection
settings. The default is Site ID 2.
Honeywell
2023
133