Setting The Time - Honeywell ERX350 User Manual

5 User Access
5.2 Working with HMI
3. Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
until CONFIG appears.
4. Press OK. The following appears on the display.
CONFIG
ALARMS
5. Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
until INSTRUMENT appears.
6. Press OK.
The following appears on the display. INSTRUMENT
SITE INFO
7. Press OK, the following appears on the display.
UNIT S/N
8. Using the UP arrow and DOWN arrow scroll through the options until DATE appears.
9. Press OK.
10. Using the keypad set the DATE and press OK.

5.2.4.2 Setting the Time

To set the time:
1. Unlock the keypad and type the PASSCODE to enter level 2 mode or level 3 mode. Refer to the
section "Accessing Level 2 Mode " for accessing level 2 mode or section " Accessing Level 3 Mode "
for accessing level 3 mode.
2. By default, in level 2 mode or level 3 mode the following appears on the display.
MAIN MENU
ALARMS
3. Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
until CONFIG appears.
4. Press OK. The following appears on the display.
CONFIG ALARMS
5. Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
Honeywell
2023
103