Table of Contents
Advertisement
5 User Access
5.4 Working with MasterLinkR515 & MasterLinkSQL
10. Click Change.
The Change Temperature Calibration Value dialog box appears.
11. Change the value to accurately match the temperature measured by the calibrated thermometer
placed in the high calibration bath.
12. Click OK.
5.4.6 Configuring the Scroll List
When you access the Meter reader mode of ERX350, 12 default items are available on the display. Press
the down arrow to sequentially scroll through items. Refer to the section "Level 0 Mode" for the 12 default
items. You can configure the Meter reader list to display the items of your choice, in the order of your
choice.
To configure the Meter reader list
1. Establish a serial communication between ERX350 and MasterLinkR515 & MasterLinkSQL. Refer to
the MasterLinkSQL User's Guide for information about establishing a serial connection between
ERX350 and Master- LinkSQL.
2. In the MasterLinkSQL window, click Find Item by Number icon.
The Find Item dialog box appears.
3. Type 130 and click OK.
The Scroll List dialog box appears. By default, Uncorrected V olume (item 002) is configured to
appear first in the list (item 130, which is the scroll list) that appears on the display.
4. Click Change.
The Change Item dialog box appears.
5. Type the item number of your choice that must be listed first in the Meter reader list and then click
Save. For example, if you want Battery usage alarm (item 100) to appear first in the Meter reader
list, then type item number 100 and then click Save.
The Scroll List dialog box appears and the item 130 (first list in Meter reader list) is configured to
6. Battery usage alarm (item 100).
7. Perform step 3 through step 5 sequentially to change items 130 through 135 and 75 through 86, if
you want to change all the 12 default items.
5.4.7 Configuring Call in Feature
To configure the Call in feature
Honeywell
2023
123
Advertisement
Table of Contents
