7. Press OK.
By default, the following appears on the display. 0
PSI
GAS PRESS
8. Press the DOWN arrow key.
The following appears on the display. 0
PSI
PRESS UNIT
9. Press OK and then using the UP arrow and DOWN arrow increase or decrease the value of Code.
The corresponding unit associated with the code appears. For example, Code 0 represents PSI.
Following are the codes and the corresponding units of measurement for PRESSURE.
Code
Units
Code 0 PSI
Code 1 kPa
Code 2 mPa
Code 3 Bar
Code 4 bar
Code 5 KGcm2
Code 6 In WC
Code 7 In HG
Code 8 mm HG
10. Press OK to select the required unit.
For example, if you press OK at Code 0, PSI is selected as the unit of PRESSURE.
5.2.5.2 Selecting the Unit of Measurement for Temperature
To select the unit of measurement for temperature:
Honeywell
2023
5 User Access
5.2 Working with HMI
106