Honeywell ERX350 User Manual page 98

After you enter the level 3 mode, the items listed in the table appear on the display; by default, ALARMS
appear. Use UP arrow and DOWN arrow to scroll through the items in the level 3 mode.
L3 main
Level 3
menu
ID Nr
categories
L3.1 PASSCODE
L3.2 ALARMS
CLR
L3.3
ALARMS
L3.4 CONFIG
L3.4.1
Honeywell
2023
L3 main menu
L3 submenu as
as displayed
displayed on LCD
on LCD
Displays active alarms. Press OK The active alarms appear
on the display.
Allows you to clear the active alarms on the display. If the
condition that caused the alarm is still present, a new alarm
is activated on the next measurement.
Allows you to configure the Level 2 sub-menu 1 items.
ALARMS
5.1 Getting Started with the Keypad
Item code Description
5 User Access
90