Setting Time And Date; Item Files; Reading/Creating Item Files - Honeywell ERX350 User Manual

You can select and configure all the items that are displayed in the Display/Change Items By
Function dialog box.
Attention: Attention: Follow the same procedure to change other functions.

5.4.2 Setting Time and Date

1. Establish a serial communication between ERX350 and MasterLinkR515 & MasterLinkSQL. Refer to
the MasterLinkSQL User's Guide for information about establishing a serial connection between
ERX350 and MasterLinkR515 & MasterLinkSQL.
2. In the MasterLinkSQL window, click on Instrument > Set Instrument Date and Time via Computer to
update ERX350 with the current PC's date and time.
A dialog appears allowing the user to accept the date and time update.
3. Click the Yes button to proceed with the Date/Time update. MasterLinkR515 & MasterLinkSQL will
always re-read the PC's clock date and time just before sending the data packet over to ERX350.

5.4.3 Item Files

Reading/Creating Item Files

l
Displaying/Viewing Item Files
l
5.4.3.1 Reading/Creating Item Files
To read or create item files:
1. Establish a serial communication between ERX350 and MasterLinkR515 & MasterLinkSQL. Refer to
the MasterLinkSQL User's Guide for information about establishing a serial connection between
ERX350 and MasterLinkR515 & MasterLinkSQL.
2. In the MasterLinkSQL window, click the
The Select Destination for Item File dialog box appears.
3. Select a location and enter the name of the file. MasterLinkR515 & MasterLinkSQL will
automatically name the file if one is not entered.
4. Click Save.
MasterLinkR515 & MasterLinkSQL proceeds to read all of the items values from the connected ERX350
unit.
Honeywell
2023
5.4 Working with MasterLinkR515 & MasterLinkSQL
ITEM icon
5 User Access
118