Compliance With Standards And European Directives - Honeywell AS302P Operating Instructions Manual

__________________________________________________________________________

3. COMPLIANCE WITH STANDARDS AND EUROPEAN DIRECTIVES

Meters are marked with the European CE mark, in accordance with the Marking Directive 93/68/EEC, to indicate
compliance with the requirements of the EMC Directive 2014/30/EU, Measuring Instruments Directive 2014/32/EU, the
Low Voltage Directive 2014/35/EU, the Radio Equipment Directive 2014/53/EU and the RoHS Directive 2011/65/EU.
The meter complies with Class M2 Mechanical environment and Class E2 Electromagnetic Environment as defined in
the Measuring Instruments Directive 2014/32/EU.
The AS302P meter has been designed and manufactured to comply with the relevant requirements of the following
Directives and Specifications.
Document
BS 7856: 2013
EN 50470-1:2006
EN 50470-3:2006
EN 61000-6-2: 2005
EN 61000-6-3: 2007
2014/53/EU
2002/95/EC and
2011/65/EU
EN 62052-11: 2003
EN 62052-31:2016
EN 62053-21: 2003
EN 62053-23: 2003
EN 62053-61: 1998
EN 62054-21: 2004
EN 62055-31:2005
EN 62056-42: 2002
EN 62056-46: 2002
EN 62056-53: 2007
EN 62056-61: 2006
EN 62056-62: 2007
© Honeywell - M450 001 1D - 23.05.2019
Title
Code of practice for special design and other features of alternating
current Watt hour meters for active energy (MID Accuracy Classes A and
B) for use in the UK
Electricity Metering Equipment (a.c.). General requirements, tests and test
conditions. Metering equipment (class indexes A, B and C)
Electricity Metering Equipment (a.c.). Particular requirements. Static
meters for active energy (class indexes A, B and C))
Generic EMC Standard, section 2: Immunity – Industrial
Generic EMC Standard, section 3: Emissions - Residential, commercial
and light industry
The "Radio Equipment" Directive ("RED")
Restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS)
Electricity Metering Equipment (a.c.). General requirements, tests and test
conditions. Metering equipment
Electricity Metering Equipment (ac) General Requirements, Test and test
conditions Part 31: Product Safety Requirements.
Electricity Metering Equipment (a.c.). Particular requirements. Static
meters for active energy (Classes 1 and 2)
Electricity Metering Equipment (a.c.). Particular requirements. Static
meters for reactive energy (Classes 2 and 3)
Electricity Metering Equipment (a.c.). Particular requirements. Power
consumption and voltage requirements
Electricity Metering Equipment (a.c.). Tariff and load control. Particular
requirements for time switches
Electricity Metering Payment Systems – Part 31 particular requirements –
Static payment meters for active energy (Classes 1 and 2)
DLMS – Electricity Metering. Data exchange for meter reading, tariff and
load control. Physical layer services and procedures for connection-
oriented asynchronous data exchange
DLMS – Electricity Metering. Data exchange for meter reading, tariff and
load control. Data link layer using HDLC protocol
DLMS – Electricity Metering. Data exchange for meter reading, tariff and
load control. COSEM application layer
Electricity Metering. Data Exchange for meter reading, tariff and load
control. Object identification system (OBIS)
DLMS – Electricity Metering. Data exchange for meter reading, tariff and
load control. Interface classes
Operating & Maintenance Instructions
7