Table of Contents
Advertisement
5 User Access
5.3 Connecting to ERX350 via MasterLinkR515 & MasterLinkSQL
5.3 Connecting to ERX350 via MasterLinkR515 & MasterLinkSQL
About MasterLinkR515 & MasterLinkSQL Software
l
Connecting the IrDA Communication USB Dongle to the Computer
l
Connecting the IrDA Communication USB Dongle to ERX350
l
Signing on to the ERX350
l
Updating ERX350 Firmware
l
5.3.1 About MasterLinkR515 & MasterLinkSQL Software
MasterLinkR515 & MasterLinkSQL is a communication software package that enables interaction with
ERX350. Using MasterLinkR515 & MasterLinkSQL you can:
Configure ERX350 to meet particular needs.
l
Calibrate ERX350.
l
Read the collected data such as pressures, temperature, and alarms.
l
Generate reports for the collected data.
l
Provide computer to instrument communication. Computer to instrument communication can be
l
through the IrDA (infrared) port on the front panel, an optional direct serial link (RS-232/485),
modem (CNI2 for cellular or Messenger for land line).
5.3.2 Connecting the IrDA Communication USB Dongle to the Computer
To connect the IrDA communication USB dongle to the computer, insert the IrDA USB dongle in the USB
port of the computer.
If the IrDA USB dongle is connected properly, a small LED on the dongle flashes intermittently, which
indicates that the computer can communicate with the IrDA USB dongle. Using the MasterLinkR515
& MasterLinkSQL communications configuration menu, confirm that the IrDA interface has been
configured properly.
5.3.3 Connecting the IrDA communication USB dongle to ERX350
To connect the IrDA communication USB dongle to ERX350
1. Insert the dongle into the magnetic pipe boot. Ensure that the cable passes through the hook
provided in the magnetic pipe boot to prevent the dongle from displacing.
2. Place the boot on ERX350. Ensure that the leg of the boot is above the eyebrow.
Honeywell
2023
111
Advertisement
Table of Contents
