Honeywell ERX350 User Manual page 165

6 Remote Communications
6.2 Connecting ERX350 with Modems
Use this tab to edit the Remote Unit Hardware Alarms' information. However, there are certain
hardware alarms that are "non-maskable;" that is, the hardware alarms are always active and you
are only permitted to customize the name (user description). When you select one of these
hardware alarm types, (from the Hardware alarm list), the Immediate alarm notification check box
and Nuisance limit box, (under Alarm Specification), appear dimmed and are unavailable for
modification.
Note: Note: Alert Mode: Select the Notify Immediately check box to enable the Remote Unit to
call immediately when the selected hardware alarm is detected. Another critical purpose of
CLEAR ALARMS checkbox is that it will clear the hardware alarms in the device (i.e. ERX350)
once the call is successful in PowerSpring.
Nuisance Limit: Specifies the number of times that the selected alarm can occur prior to being
disabled. Type a number and if the "Nuisance limit" is met, the alarm notifies the selected Remote
Unit to repeat the alarm. Properties: You can save, log, or select to alert an alarm.
Honeywell
2023
157