Honeywell ERX350 User Manual page 103

5 User Access
5.1 Getting Started with the Keypad
L3 main
Level 3
menu
ID Nr
categories
L3.10 SHUTDOWN
L3.11 BATT CHNG
L3.12 RESET BATT
RESET
L3.13
COMMS
MODEM
L3.14
CALLS
L3.15
L3.16
L3.17
L3.18
To access level 3 mode:
1. Press and hold the ESC and UP arrow at the same time for about three seconds or until the fol-
lowing Display Test (all segments on) appears.
Honeywell
2023
L3 main menu
L3 submenu as
as displayed
displayed on LCD
on LCD
Special mode to take the unit out of service – i.e. to put in
long term storage (shelf mode) Limited functionality is
enabled in this mode –just time update. No volume or
measurements are performed. HMI is active.
Enter this mode when replacing the battery –includes
resetting battery gauge.
Allows resetting the battery
gauge (assumes installing a new battery).
Resets Serial Comms – generally should not be needed.
Allows user to force an Alarm Call in to occur – assuming
ALARM CALL
proper configurations
Allows user to force a Scheduled Call in to occur –assuming
SCHED CALL
proper configurations
Allows user to cancel both Alarm and Scheduled Call retires
STOP CALLS
– Note: does not disable Call-in
BT PAIRING
BT PAIRING
UNPAIR BLE
YES /NO
Item code Description
95