Installation
Hose Installation and Care
1. Do not use hose to pull equipment.
2. Use 2 wrenches to tighten. Torque to 470-550 in-lbs
(53.1-62.1 N•m).
3. Do not tape or cover hose.
4. Do not flex hose when cold.
5. Use hose support spring.
10
6. Do not clamp, squeeze, or zip tie hose.
7. Minimum bend radius is 8 in. (20.3 cm).
8 in.
(20.3 cm)
8. Do not bend or crimp hose.
9. Do not twist hose.
10. Use proper length hose.
312094K