Graco Therm-O-Flow 20 EasyKey Instructions Manual page 58

Accessories
Local Network Hardware and Software
Configuration
Hardware
Patch cables are used to connect each unit to the local
network and to the Web connection (A) on the EasyKey
panel. See F . 28.
IG
A
ti8557
F . 28 EasyKey Web Connection
IG
Microsoft Browser Configuration
1. Establish a connection/address to the local network.
a. Open the PC control panel.
b. Select Network Connections.
c. Double click on the local area connection.
d. Select Properties.
e. Select Internet Protocol (TCP/IP).
f. Select Properties.
g. Select the appropriate Internet connection and
key in address 192.168.0.10
58
2. The EasyKey software requires Sun java to operate.
Open your web browser options advanced tab and
select Java (Sun) and deselect the Microsoft VM
selection. See F . 29. If the Sun Java option is not
IG
available follow the Software Operation procedure
and load the Sun Java program when the appropri-
ate screen and link appear.
Browser must be closed and restarted for change
to be effective.
Use smooth scrolling
HTTP 1.1 settings
Use HTTP 1.1
Use HTTP 1.1 through proxy connections
Java (Sun)
Use Java 2 v1.4.2_09 for <applet> (requires restart)
Microsoft VM
Java console enabled (requires restart)
Java logging enabled
JIT compiler for virtual machine enabled (requires restart)
F . 29 Java Internet Options
IG
It may be necessary to change the Java selection
from Sun to Microsoft for other software applications to
run correctly on your PC.
If you cannot make these changes contact your I.S.
department and request they change your computer
access rights. You must have administrative rights to
change the settings.
312094K