Graco Therm-O-Flow 20 EasyKey Instructions Manual page 59

Software Operation
1. Open Microsoft Internet Explorer.
2. In the address area type http://192.168.0.1
3. Click Enter.
4. Select yes when security screen appears.
5. Main software screen appears. See F
• If "Cannot Read Firmware" appears check for
loose hardware connections.
• If "Java script needs to be loaded" appears fol-
low the screen link to install this freeware.
F . 30: Main Software Screen
IG
Web Navigation Screens
From the main screen (see F
select buttons for reports, error log, setup, soft-
ware/resets, or language.
312094K
. 30.
IG
. 30) the operator can
IG
Reports
Display material usage report - shows the material
pumped from the unit. See F
F . 31: Display Material Usage Report
IG
Clear material usage report - deletes the material
usage from the system run screen batch total. Does not
reset grand total in setup.
Record Temperature and Cycles - records tempera-
ture and cycle information once per minute. A file is
opened and data recorded. See F
F . 32
IG
While data is recorded other web functions are unavail-
able. See F . 33.
IG
F . 33
IG
Accessories
. 31.
IG
. 32.
IG
59