Graco Therm-O-Flow 20 EasyKey Instructions Manual page 60

Accessories
Error Log
Download error log - downloads the error log to the
PC.
Display error log - displays the number of alarms, date,
time, recipe and what the error was. See F
F . 34: Display Error Log
IG
Clear error log - deletes the errors from the display.
Setup
Download setup values - saves the TOF configuration
to the PC. This file can be opened and edited using
Microsoft Excel, or used to set up multiple systems.
Display setup values - indicates what values are
currently being used for the system. Allows the operator
to verify that the right values are being used. See F
35.
F . 35: Display Setup
IG
Restore setup values - allows files to be uploaded and
restored to the TOF.
60
Software/Resets
Install EasyKey software - downloads the Graco
provided software to the PC (approximately 5 minutes).
Once complete the control panel will be reprogrammed
from the EasyKey.
. 34.
IG
Reset settings - places system back to factory default
mode.
Reset password - clears password if lost or forgotten.
Language
Download custom Language - saves the current
system language to the PC. This file is opened and a
custom language added to the B column of the Excel
file. See F
extended characters and a maximum of 32 characters.
Save the Excel file as a tab delineated file for uploading
purposes.
Restore custom language - allows the custom lan-
guage file to be uploaded to the TOF.
.
IG
F . 36: Download Custom Language
IG
Advanced Configuration
To change IP settings use the freeware configuration
program available from
working/utilities-tools/device-installer.html.
. 36.
IG
Custom languages are limited to Ascii and Ascii
www.lantronix.com/device-net-
312094K