Graco Therm-O-Flow 20 EasyKey Instructions Manual page 22

EasyKey Display Screens
Screen Setting
1 Language English,
(See F . 16)
IG
Number
Zones
Change
Setpoint
Tempera-
ture Units
Heat Soak Numeric
2 7-Day
(See F . 17) Timer
IG
External
Pump
Enable
3 Month
(See F . 18)
IG
Day
Year
Time
Password
Screen
Saver Time
22
Table 7: Advanced Setup Screens
Selection
Language displayed. The language is set at factory.
Spanish,
German,
French,
Japanese,
Chinese,
custom
4 / 4+4 / The number of zones in system is set at the factory.
4+4S
Yes/No Select Yes or No to allow operator to change setpoints from the
Zone Run screen.
°F/°C Select desired temperature units.
Enter time (in minutes) to delay air motor start after all zones
reach temperature setpoints.
On/Off (Enable / Disable 7 day timer).
On/Off Allows external device to control pump.
Numeric Select current month (1-12).
Numeric Select current day (1-31).
Numeric Select current year (4 digits).
Numeric Enter hours (0-23) and minutes (0-59).
Numeric Is only used to enter Setup mode. Default is 0, which means no
password is required to enter setup. To set a password, enter a
number (1–9999).
Numeric Enter minutes (1-99) for screen to be inactive before screen
saver turns on (screen dims). Press any key to restore. Default
is 0 (screen saver off).
Description Default
English
4
Yes
F
45
Off
Off
1
TI8142A
1
0000
0__0
0000
0
312094K