Table of Contents
Advertisement
Volume and Sound
Default Handsfree Audio Path
By default, when you make a call or answer a call without lifting the handset, the audio is played
through the phone's speaker while you speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior so that the audio is played
through the headset by default rather than the speaker.
Procedure
1. Press the
2. Use the cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Audio path.
4. Use the left and right cursor keys to switch between Headset or Speaker.
5. When completed, press Save or Done.
6. Press Back/Exit to exit the menus.
Related links
Volume and Sound
March 2023
button.
on page 143
Using 1408/1416 Phones on IP Office
Comments on this document? infodev@avaya.com
146
Advertisement
Table of Contents
