6.12 Locking the sewing feet in lifted position
1
6.13 Sewing foot pressure
–
Push the lever 1 downwards.
The sewing feet are locked in lifted position.
–
Push the lever 1 upwards.
The sewing feet are released.
or
–
Lift the sewing feet pneumatically or by pushing the knee lever.
The lever 1 then moves back into its initial position.
The required sewing-foot pressure is set with the setting wheel 2.
ATTENTION!
The material must not "swim".
Do not set a higher pressure than is necessary.
–
To increase the sewing-foot pressure = Turn the setting wheel 2
–
To decrease the sewing-foot pressure = Turn the setting wheel 2
1
2
clockwise.
counter-clockwise.
GB
23