Table of Contents
Advertisement
Value Range
1.0.0.1–223.255.255.254
DNS Setting—Port Number
Specifies the port number of the DNS server. This parameter is only available for entering values when Obtain
DNS server address automatically is selected.
Value Range
53, 1024–65535
DNS Setting—Obtain DNS server address automatically/Use the following DNS
server address
Specifies whether to enable the DHCP server to assign DNS server address information automatically to the
mother board, or to enter the information manually.
Value Range
Obtain DNS server address automatically, Use the following DNS server address
Feature Guide References
5.6.6 Dynamic Host Configuration Protocol (DHCP) Assignment
DNS Setting—Preferred DNS IP Address
Specifies the preferred IP address for the DNS server. This parameter is only available for entering values
when Use the following DNS server address is selected.
Value Range
1.0.0.0–223.255.255.255
DNS Setting—Alternative DNS IP Address
Specifies the alternative IP address for the DNS server. This parameter is only available for entering values
when Use the following DNS server address is selected.
Value Range
1.0.0.0–223.255.255.255
DSP IP Setting—Obtain DSP IP address automatically/Use the following DSP IP
address
Specifies whether the DHCP server assigns IP address information automatically to the DSP card(s), or to
enter the information manually.
Value Range
Obtain DSP IP address automatically, Use the following DSP IP address
27.1 Network Service—[1] IP Address/Ports
PC Programming Manual
807
Advertisement
Table of Contents
