Table of Contents
Advertisement
CNIP (Receive)
Specifies whether to receive the caller's name to be displayed on the called party's telephone when receiving
a SIP trunk call.
Value Range
Yes, No
Blind Transfer(REFER)
Specifies whether to allow blind transfers using REFER.
Value Range
Yes, No
Attended Transfer(REFER)
Specifies whether to allow attended transfers using REFER.
Value Range
Yes, No
Advanced
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Diversion Header
Enable this setting to allow the specified SIP trunks to detect incoming Mobile Device Access calls from
MEX-enabled mobile devices.
Value Range
Disable, Enable
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
PC Programming Manual
241
Advertisement
Table of Contents
