Table of Contents
Advertisement
Value Range
Outside Number #1–#4: Max. 32 digits consisting of 0–9,
T: Dial Tone Detection
, : Dial Pause (default 1 s)
; : Dial Pause (default 3 s)
0–9,
, #: Dial Code
Feature Guide References
3.2.2.21 Personal Custom Service
No DTMF Input Operation
Specifies the operation taken when no DTMF input (a caller does not dial anything) is received after the
Personal Greeting.
Value Range
Recording: The caller will be guided to leave a message.
Disconnect (All Day): The line will be disconnected, regardless of the time of day.
Disconnect (Only After Hours): The line will be disconnected only after hours.
Feature Guide References
3.2.2.21 Personal Custom Service
No DTMF Input Operation Wait Time
Specifies the duration of time to wait for DTMF input before the action set in No DTMF Input Operation is
performed.
Value Range
0–10 s
Feature Guide References
3.2.2.21 Personal Custom Service
Personal Distribution List
Personal Distribution Lists are used to send the same messages to several mailboxes in a single operation. A
maximum of 4 lists can be maintained with each list containing a maximum of 40 mailboxes.
List 1 Name–List 4 Name
Specifies a list name.
Value Range
Max. 32 characters
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
, #, and special codes
PC Programming Manual
721
Advertisement
Table of Contents
