Table of Contents
Advertisement
Feature Guide References
4.2.5.1 Network Direct Station Selection (NDSS)
Busy Out Cancel
Specifies the feature number used to cancel the Busy Out status of an analogue trunk.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual References
10.9 PBX Configuration—[2-9] System—System Options—Option 5—
CO
Feature Guide References
2.5.4.6 Trunk Busy Out
Simplified Voice Message Access
Specifies the feature number used to access the SVM feature to record, listen to and delete messages.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual References
12.1.8 PBX Configuration-[4-1-8] Extension-Wired Extension-Simplified Voice Message
12.2.6 PBX Configuration-[4-2-6] Extension—Portable Station—Simplified Voice Message
Feature Guide References
2.16.3 Built-in Simplified Voice Message (SVM)
Other PBX Extension
Other PBX extension numbers can be used to easily call extensions connected to PBXs at different locations
in a TIE line network. The leading numbers of all PBXs in the network that will be called should be entered in
this table. A maximum of 16 leading numbers can be programmed.
Dial
Specifies the leading extension number of the other PBX.
Value Range
Max. 3 digits (consisting of 0–9, *, and #)
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table—
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Leading Number
Busy Out—Busy Out for Analogue
PC Programming Manual
399
Advertisement
Table of Contents
