Table of Contents
Advertisement
19.1 PBX Configuration—[11-1] Maintenance—Main
LAN—SMDR Password
Specifies the password used to output the SMDR data via the LAN.
Value Range
Max. 10 characters
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
LAN—New Line Code for Telnet
Specifies the new line code for a terminal emulator.
If the terminal emulator automatically feeds lines with a carriage return, select CR (Carriage Return).
If not, select CR + LF (Line Feed).
Value Range
CR + LF, CR
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
Maintenance
Local Alarm Display—Extension 1, Extension 2
Specifies the extension numbers of PTs that will be notified by the PBX about local alarms. When the PBX
detects a PBX error, the System Alarm button on the PT turns on red. When this button is pressed, the display
will show the error number, and the button light will turn off automatically.
Value Range
Max. 5 digits (consisting of 0–9)
Feature Guide References
5.6.4 Local Alarm Information
Daily Test Start Time—Set
Enables the daily self check of the PBX for local alarm and error log.
Value Range
Disable, Enable
Feature Guide References
5.6.4 Local Alarm Information
Daily Test Start Time—Hour
Specifies the hour of the PBX daily self check start time.
692
PC Programming Manual
Advertisement
Table of Contents
