Table of Contents
Advertisement
10.3 PBX Configuration—[2-3] System—Timers & Counters
10.3 PBX Configuration—[2-3] System—Timers &
Counters
Various system timers and counters can be programmed.
Dial / IRNA / Recall / Tone
Automatic Redial—Repeat Counter
Specifies the number of times Automatic Redial is attempted before being cancelled.
Value Range
0–10
Feature Guide References
2.6.3 Last Number Redial
Automatic Redial—Repeat Interval (x10s)
Specifies the length of time between repeated Automatic Redial attempts.
Value Range
10 ´ n (n=1–120) s
Feature Guide References
2.6.3 Last Number Redial
Automatic Redial—Redial Call Ring Duration (x10s)
Specifies the length of time that the PBX waits for the called party to answer an Automatic Redial attempt. This
is the length of time that the called party's extension will ring for each attempt.
Value Range
10 ´ n (n=1–30) s
Feature Guide References
2.6.3 Last Number Redial
Automatic Redial—Analogue CO Mute / Busy Detection Timer (s)
Specifies the length of time before the PBX stops muting the caller's voice and cancels busy tone detection
when Automatic Redial to analogue trunk is performed.
Value Range
0–15 s
360
PC Programming Manual
Advertisement
Table of Contents
