Table of Contents
Advertisement
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Value Range
Disable, Blank UDP
T.38 Option
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
T38 FAX QoS Available
Specifies the type of value to be stored in the ToS field in the IP header when using the T.38 protocol.
Value Range
ToS, DSCP, HEX
T38 FAX QoS-ToS Priority
Specifies the priority level in the ToS field when using the T.38 protocol.
Value Range
0–7
T38 FAX QoS-ToS Type
Specifies the ToS type in the ToS field when using the T.38 protocol.
Value Range
Normal, Monetary Cost, Reliability, Throughput, Delay
T38 FAX QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ when using the T.38 protocol. This setting is
compulsory when DSCP is selected in T38 FAX QoS Available.
Value Range
0–63
238
PC Programming Manual
Advertisement
Table of Contents
