Table of Contents
Advertisement
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
No. of Additional Digits
Specifies the number of additional digits following the leading number.
Value Range
None: 0 digit
X: 1 digit
XX: 2 digits
Features
Feature numbers to access various PBX features can be programmed. The following features are available
while hearing a dial tone.
Operator Call
Specifies the feature number used to call the operator.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
14.6 PBX Configuration—[6-6] Feature—Tenant
Feature Guide References
5.1.5 Operator Features
Idle Line Access (Local Access)
Specifies the feature number used to make a trunk call by Idle Line Access (selects an idle trunk automatically).
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual References
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local Access Priority
Feature Guide References
2.5.5.3 Trunk Access
Trunk Group Access
Specifies the feature number used to make a trunk call using an idle trunk from a certain trunk group.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
380
PC Programming Manual
Advertisement
Table of Contents
