Table of Contents
Advertisement
18.4 PBX Configuration—[10-5] CO & Incoming
Call—Miscellaneous
The Intercept Routing feature can activate when the destination of an incoming call is unavailable, or when
there is no destination for the call, to reroute the call to an alternate destination.
Intercept—Intercept Routing - DND (Destination sets DND.)
Enables the Intercept Routing—DND feature to activate when the original destination is in DND mode.
Value Range
Disable (Busy Tone): Sends a busy tone to the caller. (However, a call through an LCOT card will ring at the
original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Feature Guide References
2.1.1.5 Intercept Routing
2.3.3 Do Not Disturb (DND)
Intercept—Routing to Operator - No Destination (Destination is not
programmed.)
Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call.
Value Range
Disable (Reorder Tone): Sends a reorder tone to the caller. (However, a call through an LCOT card will ring
at the original destination while the caller hears a ringback tone.)
Enable: Redirects the call to an operator
Feature Guide References
2.1.1.6 Intercept Routing—No Destination
Intercept—Intercept Routing for Extension Call
Enables the Intercept Routing feature to operate for extension calls.
Value Range
Disable, Enable
Feature Guide References
2.1.1.6 Intercept Routing—No Destination
18.4 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous
PC Programming Manual
683
Advertisement
Table of Contents
