Table of Contents
Advertisement
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property
Value Range
0–63
UT Codec Priority - 1st—UT Codec Priority - 4th
Specifies the priority of the codecs to be used. None is only available for 2nd, 3rd, and 4th priorities.
Value Range
G.722, G711A, G.729A, G711Mu, None
Packet Sampling Time
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms
Jitter Buffer - Maximum Delay
Specifies the maximum size of the jitter buffer for voice communications.
Value Range
3–50 ms
Jitter Buffer - Minimum Delay
Specifies the minimum size of the jitter buffer for voice communications.
Value Range
1–2 ms
Jitter Buffer - Initial Delay
Specifies the initial size of the jitter buffer for voice communications.
Value Range
1–7 ms
Gain Type
Specifies the type of gain file to distribute to connected SIP devices.
Value Range
Default, Type1, Type2, Type3
Remote Place
The settings on this screen are for programming the Simple Remote Connection feature for connecting SIP
phones in remote locations to the PBX. For details and conditions regarding the use of this feature, refer to
"5.2.2.1 Simple Remote Connection" in the Feature Guide.
292
PC Programming Manual
Advertisement
Table of Contents
