Table of Contents
Advertisement
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
Value Range
Date and time
Feature Guide References
3.2.1.2 Auto Forwarding
Personal Custom Service
Specifies the Personal Custom Service. The System Administrator can assign an operation to each key.
Note
•
These settings can be changed by subscribers.
•
Make sure to add a trunk access number when you store an outside telephone number.
•
When the Unified Messaging system calls a trunk via the PRI card, be sure to add "#" after the telephone
number (1112223333 in the example here): 9P1112223333#PP123PP456PPX# (P: Dial Pause)
Follow the steps below to edit a Personal Custom Service.
1.
Click Edit.
2.
For each Key, specify an Assigned Operation.
3.
For each Assigned Operation that is specified, specify a Value
4.
Click OK when finished.
Assigned Operation
•
Transfer to specified mailbox: Allow the caller to leave messages in a specified mailbox.
•
Transfer to specified extension: Transfers the caller to a specified extension.
•
Transfer to Voice Mail Service: Allows the caller to access Voice Mail Service.
•
Transfer to Automated Attendant Service: Allows the caller to access Automated Attendant Service.
•
Transfer to specified Custom Service Menu: Transfers the caller to the Custom Service specified here.
•
Transfer to operator: Connects the caller to an operator.
•
Transfer to outside (specified number): Transfers the caller to a specified outside telephone number.
→Enter the Outside Numbers list index (1-4).
•
Page the party: Pages the subscriber.
•
Repeat greeting: Repeats the greeting.
•
None: No operation assigned.
Value Range
•
Transfer to specified mailbox: 2–[the value set in
•
Transfer to specified extension: 2–8 digits
•
Transfer to specified Custom Service Menu: 1–200
•
Transfer to outside (specified number): Outside Number 1–4
Feature Guide References
3.2.2.21 Personal Custom Service
Outside Numbers
Specifies the outside telephone numbers that can be used for the "Transfer to outside (specified number)"
operation in the Custom Service settings. Click OK when finished.
720
PC Programming Manual
Mailbox No. Max. Length (3-8)] digits
Advertisement
Table of Contents
