Table of Contents
Advertisement
9.31 PBX Configuration—[1-1]
Configuration—Slot—Port Property—E1 Port
Various settings can be programmed for each E1 channel. To change the status of ports, click Command.
Shelf
Indicates the shelf position (reference only).
Value Range
Shelf number
Slot
Indicates the slot position (reference only).
Value Range
Slot number
CH
Indicates the channel number (reference only).
Value Range
channel number
Connection
Indicates the channel status (reference only).
This column offers two ways to open the screen to select the channel command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Value Range
INS: The channel is in service.
OUS: The channel is out of service.
Fault: The channel is not communicating with the network.
Subscriber Number
Specifies the number used as the CLIP number.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
PC Programming Manual
337
Advertisement
Table of Contents
