Table of Contents
Advertisement
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
NLP Setting
Specifies the NLP (Non-Linear Processor) setting to control echo sound quality.
Value Range
Disable, Weak, Normal, Strong
Supplementary Service
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
CLIP (Receive)
Specify where caller information about an incoming call is obtained:
•
Prioritised: P-Asserted-Identity®P-Preferred-Identity®From Header
•
Fixed: From Header
Value Range
P-Asserted-Identity Header, From Header
Note
•
To copy values from one location to another, click Copy to.
•
If the Channel Attribute setting of the port is "Additional", the setting cannot be changed.
CLIR
Specifies whether to allow restriction of the display of the CLIP number on the called party's telephone when
making a SIP trunk call.
Value Range
Yes, No
CNIP (Send)
Specifies whether to send the caller's name to be displayed on the called party's telephone when making a
SIP trunk call.
Value Range
Yes, No
240
PC Programming Manual
Advertisement
Table of Contents
