Table of Contents
Advertisement
Resending Time Out (MGCP)
Specifies the length of time after which the PBX terminates resending MGCP (Media Gateway Control Protocol)
data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
75–120 s
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Echo Canceller Ability
Specifies the echo canceller ability time.
Note
For KX-NT500 series phones, in place of this setting, the setting for
9.19 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Card Property—Main is applied.
Value Range
OFF, 64 ms, 128 ms
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
DSP Digital Gain (Down)
Specifies the DSP Digital Gain for the down voice path.
Note
For KX-NT500 series phones, in place of this setting, the setting for
9.19 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Card Property—Main is applied.
Value Range
-14–6 dB
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
DSP Digital Gain (Up)
Specifies the DSP Digital Gain for the up voice path.
Note
For KX-NT500 series phones, in place of this setting, the setting for
Configuration—[1-1] Configuration—Slot—V-UTEXT—Card Property—Main is applied.
Value Range
-14–6 dB
9.13 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Card Property
Echo Cancellation Ability in
DSP Digital Gain (Down) in
DSP Digital Gain (Up) in 9.19 PBX
PC Programming Manual
257
Advertisement
Table of Contents
