Replacing The Hot Surface Ignitor (Hsi) Of The Burner Bake, Nozzle Bake-Burner, And Holder Bake-Burner - Samsung NX58H5600SS/AA Service Manual

3. Disassembly and Reassembly
3-19 Replacing the HOT SURFACE IGNITOR (HSI) of the BURNER BAKE,
NOZZLE BAKE-BURNER, and HOLDER BAKE-BURNER
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Hot Surface
Ignitor (HSI)
Nozzle Bake
-Burner
Holder
Bake-Burner
HSI
NOZZLE
HOLDER
NOTE.
32
1. To replace the burner bake HSI,
Remove 2 screws assembled to
HSI
1. To replace the nozzle bake-burner,
Remove
9/32-inch socket wrench.
1. To remove the holder-bake burner,
Remove 2 screws supporting the
holder-bake burner to the rear of
the oven.
2. When the service is complete,
reverse the order to install Burner
bake, HSI, Nozzle, Holder bake-
burner.
Note: The
locking screw and opening or
closing the air shutter at the
base of the oven burner.