Removing The Latch-Door & Switch-Door Plunger - Samsung NE597N0PBSR Servise Manual

3. Disassembly and Reassembly
3-7 Removing The Latch-Door & Switch-Door Plunger
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Latch-Door
& Switch-
Door Plunger
* Reassembly of All part is the reverse order of disassembly.
Explanation Photo
21
Explanation
1. Turn off the electrical supply going to the range.
2. Open the oven door.
3. Raise the cooktop (see page 15 for the
procedure).
4. To remove the Latch-Door:
a) Remove the 2 screws from the front of cavity.
b) Remove two screw from Cover-Back Main
Guard and remove latch-door
5. To remove the Switch-Door Plunger
a) Remove the Cover-Back Guard Wire.
(see page 11 for the procedure).
b) Release the wire from Cable Clamp.
c) Remove the Switch-Door Plunger from the
range. take out carefully with shaking up and
down by using tool.